Multifunction calibrator, MC4 is suitable for calibrating various process parameters, such as pressure, temperature and electrical signals. Calibration results are automatically stored in the MC4's memory. Data upload to PC using Beamex CMX Calibration Software is possible.
MC4 Documenting Process Calibrator - Beamex
High accuracy is one of the important features of the MC4. A standard feature of the MC4 includes an accredited calibration certificate as proof of its accuracy. The correction coefficients of a PRT probe can be programmed into the MC4 to further improve temperature accuracy.
A hand-held Dewpoint Meter and remote data logging monitor in a single gauge. Measures and records all the relevant climatic parameters required to determine whether conditions are suitable for painting.
319 Dewpoint Meter Bluetooth - Elcometer
Intuitive, multi-lingual menu structure with large, customer definable illuminated display. Dustproof and waterproof equivalent to IP66 with fully sealed sensors, suitable for use in the harshest of environments.
The Standard gauge has a 10 reading rolling memory. The Top gauge has the added advantage of a large inbuilt memory to accurately record each measurement, storing up to 40,000 sets of readings in 999 batches.
Elcometer Inspection and Testing Equipment
Edge Lane Manchester M43 6BU United Kingdom
Manufacture and supply of inspection equipment to the paint, coatings and concrete industries. Design and development of new custom testing solutions.
319 Dewpoint Meter Bluetooth - Elcometer
Intuitive, multi-lingual menu structure with large, customer definable illuminated display. Dustproof and waterproof equivalent to IP66 with fully sealed sensors, suitable for use in the harshest of environments.
The Standard gauge has a 10 reading rolling memory. The Top gauge has the added advantage of a large inbuilt memory to accurately record each measurement, storing up to 40,000 sets of readings in 999 batches.
Elcometer Inspection and Testing Equipment
Edge Lane Manchester M43 6BU United Kingdom
Manufacture and supply of inspection equipment to the paint, coatings and concrete industries. Design and development of new custom testing solutions.
The new Fluke Ti32 combines a powerful 320x240 sensor into the award winning, rugged design of the Ti25 and Ti10, delivering the first industrial grade, high performance thermal imager.
Fluke Ti32 Thermal Imager for Industries
No need to carry pen and paper-record findings by speaking into the imager. Voice annotations can be recorded with every image you take. Decide for yourself, Amazing Fluke Instrument Test. Thermal imagers from fluke. Ti32 Infrared Camera survives a 2 meter drop - without a scratch.
One-handed focus capability, emissivity correction, reflected background temperature compensation, and transmission correction increase the accuracy of measurements in most situations
Specifications -
Temperature measurement range (not calibrated below -10 °C) -20 °C to +600 °C (-4 °F to +1112 °F)
Detector type 320 X 240 Focal Plane Array, uncooled microbolometer
Thermal sensitivity (NETD) ≤ 0.045 degrees C and 45 mK
Infrared spectral band 7.5 μm to 14 μm (long wave)
Fluke Ti32 Thermal Imager for Industries
No need to carry pen and paper-record findings by speaking into the imager. Voice annotations can be recorded with every image you take. Decide for yourself, Amazing Fluke Instrument Test. Thermal imagers from fluke. Ti32 Infrared Camera survives a 2 meter drop - without a scratch.
One-handed focus capability, emissivity correction, reflected background temperature compensation, and transmission correction increase the accuracy of measurements in most situations
Specifications -
Temperature measurement range (not calibrated below -10 °C) -20 °C to +600 °C (-4 °F to +1112 °F)
Detector type 320 X 240 Focal Plane Array, uncooled microbolometer
Thermal sensitivity (NETD) ≤ 0.045 degrees C and 45 mK
Infrared spectral band 7.5 μm to 14 μm (long wave)
Cost-effective solution to monitoring and control applications which require zero and span adjustment for process signals such such as 4-20 mA, 0-5 V, 0-10 V, or strain gauges.
Laureate Digital Process Panel Meters
Designed for system use - Optional plug-in boards for communications and control include Ethernet and other serial communication boards, dual or quad relay boards, and an isolated analog output board. Laureates may be powered from 85-264 Vac or optionally from 12-32 Vac or 10-48 Vdc.
An isolated 5, 10 or 24 Vdc isolated excitation output is standard to power transducers or two-wire transmitters. Ratiometric operation, which automatically compensates for changes in the applied excitation, is jumper selectable for applications, such as bridges, where the signal to be measured is proportional to the excitation level.
Features Include
Laureate Digital Process Panel Meters
Designed for system use - Optional plug-in boards for communications and control include Ethernet and other serial communication boards, dual or quad relay boards, and an isolated analog output board. Laureates may be powered from 85-264 Vac or optionally from 12-32 Vac or 10-48 Vdc.
An isolated 5, 10 or 24 Vdc isolated excitation output is standard to power transducers or two-wire transmitters. Ratiometric operation, which automatically compensates for changes in the applied excitation, is jumper selectable for applications, such as bridges, where the signal to be measured is proportional to the excitation level.
Features Include
- 0.2, 2, 20, 200 and 300V ranges
- 2, 20, 200 mA and 5A ranges
- 4-1/2 to 5 digit resolution
- Span adjust from 0 to ±99,999
- Zero adjust from -99,999 to +99,999
- Peak or valley display and auto-tare
Measures pH, ORP (mV/Rel. mV), and temperature(°C or F). The large display is easy to read even at a distance and features stability indication. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold.
pH 2700 Benchtop Meter- OAKTON Instruments
Each meter includes a convenient slide-out calibration card for quick reference. All models (except for DO 2700) include an electrode arm and metal bracket which can be easily attached to the left or right side of the meter according to your preference.
Some Features
pH 2700 Benchtop Meter- OAKTON Instruments
Each meter includes a convenient slide-out calibration card for quick reference. All models (except for DO 2700) include an electrode arm and metal bracket which can be easily attached to the left or right side of the meter according to your preference.
Some Features
- pHRange -2.000 to 20.000
- mVRange -2000.0 to 2000.0
- TemperatureRange 32 to 212°F (0.0 to 100.0°C)
- Up to 500-point memory with date-time stamp for GLP
- Calibration-due alarm let you know when to recalibrate
- Audible alarms alert you when reading fall out of range
- Output data to either printer or PC